ESME Valves
Technical Data Sheet
DS-R1480 · Issue — · Page 1 / 2
Self-Acting Pressure Reducing Regulators

R1480

Pressure Reducing Regulator Valve

UK-engineered pressure control since 1939

R1480 sectional drawing
R1480 — sectional arrangementIllustrative · final drawing supplied by ESME

Product Overview

The R1480 is a self-acting pressure reducing regulator designed to reduce and maintain downstream pressure without an external power or pilot supply. A spring-loaded diaphragm senses downstream pressure and positions the valve plug as operating demand changes.

The packless gland design removes stem packing as a potential leak path. Different body sizes, materials, seat arrangements, actuator sizes and sensing configurations are available depending on the application.

Pressure range
0.007–20 barG
Body sizes
1"–6"
Flange class
Up to Class 600

Specifications at a Glance

Function
Downstream pressure reduction, self-acting (spring operated)
Media
Oil, water, air, steam, gasesOr any fluid compatible with materials of construction
Body sizes
1", 1½", 2", 3", 4", 6"Double & balanced seat
Connections
Screwed 1"–2"; flanged all sizesFlanged up to Class 600
Body materials
Carbon steel, stainless steel, bronze, aluminium bronze
Trim / diaphragm
Trim: stainless steel, MonelDiaphragm: stainless steel, Monel, elastomer
Pressure range
0.007 – 20 barGControlled range, 5 actuator sizes
Temperature range
To be confirmed by ESME
Working pressure
To be confirmed by ESME

Key Features

  • Self-acting operation with no external power or pilot supply
  • Packless gland design
  • Multiple seat arrangements available
  • Range of actuator sizes
  • External sensing available
  • Differential control options available
  • Multiple body materials available
  • High-capacity variant available where appropriate

Configuration Options

Final configuration is selected against the operating conditions and project specification.

Materials
Carbon steel · Stainless steel · Bronze · Aluminium bronze · Monel trim
Connections
Screwed (1"–2") · Flanged to Class 600
Seating
Composition seat for tight closure (above 1") · Metal seat hand lapped to Class III, ANSI/FCI 70‑2
Pressure ranges
Five actuator sizes, 0.007 – 20 barG · HL: two actuator sizes, 0.2 – 9.3 barG
Special service
NACE MR-01-75 (Rev 93) · Cryogenic service
Configurations
Differential control · External sensing

Information Required for Selection & Quotation

Final ordering codes supplied by ESME
  1. 1.Model / variant if known
  2. 2.Required body size
  3. 3.Connection
  4. 4.Media
  5. 5.Inlet pressure
  6. 6.Required outlet pressure / range
  7. 7.Temperature
  8. 8.Flow
  9. 9.Material requirements
  10. 10.Operating conditions
  11. 11.Testing requirements
  12. 12.Special options or project requirements

RFQs, process datasheets, material requisitions, drawings and project specifications can be submitted with the enquiry.

Additional Technical Information Available on Request
  • General Arrangement drawings
  • Cv / capacity data
  • Dimensions and weights
  • Engineering / installation information
  • Project-specific documentation